At Enhanced Scanning, one of the main services we provide is concrete scanning. This process, which typically uses ground-penetrating radar (GPR), allows us to “see” inside slabs, walls, and ceilings before someone cuts, cores, or drills into them. A concrete scan can reveal rebar, post-tensioning cables, conduits, voids, and embedded utilities without damaging the structure.
Before our technician arrives with the scanning equipment, there are a few things you can do to prepare the area and help ensure the best possible results.
Define the Scope of Work Before the Technician Arrives
Start by determining exactly what you need to learn. Are you planning to core a hole for plumbing, cut a new doorway, install anchors, or assess a slab for structural problems? The purpose of the scan helps determine the appropriate scanning method, the required depth, and the areas that need to be covered.
Share this information with your technician in advance, along with any available documentation, such as architectural drawings, structural plans, and as-built records. Even imperfect drawings can help our technicians anticipate what they may encounter, including the likely direction of rebar or the presence of post-tensioning cables.
Clear and Prepare the Work Area
GPR equipment is typically moved across the concrete surface in a grid pattern, so the scanning area needs to be accessible and relatively smooth. Before the scan:
- Remove furniture, equipment, and stored materials from the scanning area and the surrounding space.
- Sweep or clean the surface to remove debris, gravel, standing water, and loose materials that could interfere with the scanning process.
- Mark the target area with chalk or tape so everyone agrees on where the scanning should take place.
If the surface is covered with carpet, tile, or thick coatings, let your technician know in advance. Scanning can often be performed through thin finishes, but thick or metallic coverings may require removal or a different approach.
Control Environmental Conditions
Moisture can affect GPR performance and make results more difficult to interpret. Wet concrete may weaken radar signals, depending on the conditions and the material being scanned. If your project involves exterior slabs or ground-level floors, try to schedule scanning during dry weather and avoid pressure washing or other water-intensive work beforehand. Indoors, address any active leaks or flooding before the technician arrives.
Also consider potential sources of electromagnetic interference. Heavy machinery, radio transmitters, and other equipment may interfere with certain scanning instruments or affect data collection. If possible, coordinate with your technician to determine whether any nearby equipment should be powered down during the appointment.
Coordinate Access and Scheduling
Make sure the technician can access the site at the scheduled time. If parking, security procedures, or building entry could present challenges, make the necessary arrangements beforehand.
It’s also helpful to schedule concrete scanning at a time that minimizes disruption to normal business activities. Depending on the project, after-hours appointments or periods of lower activity may be preferable.
Decide How Results Will Be Marked and Documented
Before work begins, discuss the expected deliverables with your technician. Our technicians typically mark the locations of detected embedded items directly on the concrete surface using paint or chalk. However, upon request, we can also provide a customized CAD overlay or digital file showing the locations of embedded items.
Decide in advance who will receive the documentation and how it will be stored. Keeping accurate records can be valuable for future renovations because they provide contractors with information about previously identified embedded items and potential hazards.
Review Results Before Moving Forward
After scanning is complete, walk through the area with the technician, if possible. Confirm what each marking represents and ask any questions you may have. Make sure everyone involved in the project understands the findings before cutting, coring, or drilling begins.
Remember that no scan is infallible. GPR results have limitations, and some materials or conditions can make certain features difficult to detect or interpret. Discuss these limitations with your technician, including the recommended precautions to take when disturbing the concrete near identified objects. For projects where additional certainty is needed, consider whether another inspection method, such as concrete X-ray, would be appropriate.
Investing a little time in preparation helps our technicians collect useful data, keeps your project moving forward, and reduces the risk of accidental strikes that can endanger people, damage property, and increase project costs.
If you need concrete scanning anywhere in Southern California, contact Enhanced Scanning today to schedule service.